Overview Of The Displays - Sennheiser EK 300 IEM Instruction Manual

Product overview

Overview of the displays

After switch-on, the diversity receiver displays the "Frequency/Name"
standard display. For further illustrations and examples of the different
standard displays, refer to page 10.
The display backlighting is automatically reduced after approx. 20 seconds.
Display
RF level "RF"
(Radio Frequency)
Audio level "AF"
(Audio Frequency)
Frequency
Name
Lock mode icon
Battery status
Muting function
"MUTE"
or audio channels
Pilot tone "P"
6
519.150
ew300 IEM
MUTE
P
RF AF
Meaning
Diversity display:
Antenna input I is active
RF signal level:
Field strength of the received signal
RF
Squelch threshold level
Peak hold function
Modulation of the transmitter
(channel-separated when the
transmitter is set to stereo mode)
When the display shows full deflec-
AF
tion, the audio input level is exces-
sively high.
Current receiving frequency
(see page 17)
Freely selectable name of the receiver
(see page 15)
Lock mode is activated (see page 10)
Charge status:
approx. 100%
approx. 70%
approx. 30%
charge status is critical, the red
LOW BATT
"Mute" is only displayed on the
Name" standard display (see page 10)
• when the transmitter's RF signal is
deactivated or
• when the transmitter is set to mono mode
and therefore does not transmit a pilot
tone but the receiver's pilot tone evalua-
tion is activated.
The audio channels are only displayed on the
"Frequency/Limiter" and
Boost" standard displays (see page 10)
Stereo
Focus
Activated pilot tone evaluation
(see page 18)
MHz
Antenna input II is active
¿
LED
"Frequency/High
is flashing:
¿
"Frequency/