2-5. TRAY COVER REMOVAL
4 Tray cover
3 Two claws
B
2 Pull the tray in the
direction of the
arrow B.
A
1 Insert a tapering driver into the aperture of the
unit bottom, and move the lever of chuck cam
in the direction of the arrow A.
2-6. FRONT PANEL REMOVAL
3 Two screws
(B3)
7 Claw
8 Front panel
4 Boss
1 Connector
5 Boss
(CN203)
2 Flat cable
(CN006)
6 Claw
2-7. MECHANISM DECK REMOVAL
4 Mechanism deck
1 Connector
(CN001)
2-8. TRAY REMOVAL
2 Chuck ass'y
B
4 Remove the tray in
the direction of the
arrow B.
2-2
3 Screw
(B3)
2 Two flat cables
(CN003, 004)
1 Two screws
(BTP2.6 × 12)
A
3 Move the lever of chuck cam
in the direction of the arrow A.