Samsung WF0702NCF User Manual page 7

Do not unplug the appliance by pulling at the power cord, always grip the plug fi rmly and
pull straight out from the outlet.
- Damage to the cord may cause short-circuit, fi re and/or electric shock
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service centre.
- Failure to do so may result in electric shock, fi re, problems with the product, or injury.
If any foreign substance such as water has entered the appliance, unplug the power plug
and contact your nearest service centre.
- Failure to do so may result in electric shock or fi re.
When the water supply hose comes loose from the faucet and fl oods the appliance, unplug
the power plug.
- Failure to do so may result in electric shock or fi re.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
- Failure to do so may result in electric shock or fi re.
CAUTION SIGNS FOR USING
CAUTION
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failure to do so may result in discoloration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
- When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the tap slowly.
Open the tap slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is fl ooded because of a draining problem, it may result in
Insert the laundry into the washer completely so that laundry does not get caught in the door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer,
Ensure that the tap is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failure to do so may result in property damage or injury.
Check if the rubber seal is not contaminated by foreign substances (waste, thread, etc).
- If the door is not closed completely, it may result in water leakage.
Open the tap and check if the water supply hose connector is fi rmly tightened and that
there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water leakage.
To reduce the risk of fi re or explosion:
- Under certain conditions, hydrogen gas may be produced in a hot water system such
WF0702NCE-02824U_EN.indd Sec10:7 WF0702NCE-02824U_EN.indd Sec10:7
part or in water leakage.
electric shock or fi re due to electric leakage.
or result in water leakage.
as your hot water heater that has not been used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or
more, turn on all hot water taps in your home, and let the water fl ow for several minutes
before using your washing machine. This will release any hydrogen gas build–up. Since
hydrogen gas is fl ammable, do not smoke or light an open fl ame during this time.
Ventilate immediately without touching the power plug if there is a gas leak.
safety information _7
2011-03-09 2011-03-09 10:45:38 10:45:38