Samsung WF0702NCF User Manual page 21

DELAY END
3
SELECTION BUTTON
TEMPERATURE
4
SELECTION BUTTON
SPIN SELECTION
5
BUTTON
OPTION
6
SELECTION BUTTON
START/PAUSE
7
SELECTION BUTTON
POWER BUTTON
8
WF0702NCE-02824U_EN.indd Sec5:21 WF0702NCE-02824U_EN.indd Sec5:21
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).
The hour displayed indicates the time when the wash cycle will be
fi nished.
Press this button repeatedly to cycle through the available water
temperature options:
(Cold, 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
WF0702
All Lamps Turn Off,
WF0700
All Lamps Turn Off,
"No spin " - The laundry remains in the drum and no spin cycle is
performed after the fi nal drain.
"Rinse Hold (All Lamps Turn Off)" -The laundry remains soaking in the
fi nal rinse water. Before the laundry can be unloaded, either a Drain or
Spin cycle must be performed.
Press this button repeatedly to cycle through the wash options:
(Pre-Wash) (Rinse+)
(Rinse+) (Pre-Wash) +
(Pre-Wash) + (Rinse+) +
(Pre-Wash): Press this button to select Pre-Wash. Pre-wash is only
available with: Cotton, Synthetics, Baby Care.
(Rinse+): Press this button to add additional rinse cycles. The
maximum number of rinse cycles is fi ve.
(Intensive): Press this button when the laundry is heavily soiled and
needs to be washed intensively. The cycle time is increased for each
cycle.
Press to pause and restart a cycle.
Press it once to turn your washing machine on, press it again to turn
your washing machine off.
If the washing machine is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
, 400, 800, 1200 rpm
, 400, 800, 1000 rpm
(Intensive) (Pre-Wash) +
(Intensive) (Rinse+) +
(Intensive) (off)
washing a load of laundry _21
(Intensive)
2011-03-09 2011-03-09 10:45:47 10:45:47