Ozone Safety - Epson AcuLaser C2900N Safety Information Manual

Ozone safety

Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced
only when the printer is printing.
Ozone exposure limit
The Epson laser printer generates less than 3 mg/h of continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
❏ Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏ Not blown directly into the user's face
❏ Vented directly out of the building whenever possible
Standard and aprovals
European model
Low voltage directive
2006/95/EC
Epson AcuLaser C2900/CX29 Series
EN60950-1
Safety Information Guide
Safety Instructions 10