D-Link DSM-260 Quick Installation Manual page 4

Miracast Users
The LED on the top of the DSM-
3
260 will illuminate blue. Switch
your TV channel to the correct
HDMI input source. You will
see the D-Link logo on the TV
followed by the main menu.
On your mobile device, open the wireless utility and connect
4
to the DSM-260. The wireless settings will be displayed on
the bottom of the menu screen.
Once you connect you can use either
5
your TV remote or the downloaded
D-Link Media app to navigate. Select
Miracast and enter.
Note: The remainder of this Install Guide will assume that you
have installed the D-Link Media app.
On your mobile device, change the
6
wireless display to ON and select
the DSM-260. Allow a few seconds to
authenticate.
The display on your mobile device will now be displayed on
7
your TV.
Your Miracast setup is complete!
4
DSM-260