Package Contents; Minimum Requirements; Hardware Overview - D-Link DSM-260 Quick Installation Manual

Package Contents

DSM-260 MirrorStreamer
TV Adapter
Micro USB Cable

Minimum Requirements

• Mobile Device (Smart Phone/Tablet) or Laptop with
installed wireless adapter
• TV with an HDMI input (for HD quality) or composite analog
connections.
• Wireless router with Internet connection (WAN Mode)
If any of the above items are missing, please contact your reseller.

Hardware Overview

Micro
1
USB
Port
Mode/
2
Reset
A/V
3
Port
HDMI
4
Port
2
1
Left Side
Connect the supplied USB cable here
Press and hold up to 5 seconds to toggle between Miracast and DLNA
mode.
Press and hold between 5-10 seconds to reboot the DSM-260.
Press and hold over 15 seconds to reset the DSM-260 to the factory
default settings.
Firmly connect the supplied A/V cable here and the other end into
your TV or home theater receiver. If you are using an HDMI connection,
you do not have to connect this cable. Note that you can only receive
up to 480p quality with a composite connection.
Connect an HDMI cable (not included) here and the other end
into your TV or home theater receiver. Must be used for HD quality
(720p/1080p) display.
2
Right Side
A/V Cable
Quick Install Guide
3 4
Bottom
DSM-260