Installing The Sim - NEC e616V User Manual

Installing the SIM

Your SIM (Subscriber Identity Always disconnect the charger
Module) contains your phone and other accessories from
number, service details and your handset before inserting
contacts, and must be inserted and removing your SIM.
into your handset.
Your 3 SIM may only be used
If the SIM is removed, your in handsets which are enabled
handset becomes unusable for 3 services. Any attempt to
until a valid one is inserted. use the SIM in other handsets
may result in serious damage
The holder for your SIM is
to the handset and may
located underneath the battery.
1 Pull out the release lock at
the top of the battery.
2 Remove the battery.
e616V
1.1 Get ready to go
prevent you from being able
to use it, including making
emergency calls. In these
instances, we are not
responsible for any such
damage or usage problems.
3 Insert your SIM into the
holder, ensuring the gold
plate is facing down and the
card is positioned as shown.
4 Slide the SIM securely
into its SIM holder before
replacing the battery.
5 Replace the battery by
placing the ridge at the
side into the side of your
handset. Push the battery
down into position and
snap it into place.
SIM
e616V
Get ready to go 1.2