Battery Use; Installing A Memory Card - NEC e616V User Manual

Battery use

Battery performance depends If you don't intend to use the
on many factors, including battery for a long period of
signal strength, the features time, remove it from the
and / or settings you select handset and store it in a
and use, and your voice, place with low humidity
data and other application and low temperature.
usage patterns.
Over extended periods of time,
Battery care batteries gradually degrade
and require longer charging
To prevent injuries or burns,
times. This is normal. If you
do not allow metal objects to
charge your battery regularly
contact or short-circuit the
and notice a decrease in talk
battery terminals.
time or an increase in charging
To maximise your
time, then it's probably time to
battery's performance
buy a new battery.
Always use NEC Original™
The rechargeable batteries that
batteries and battery chargers.
power your handset must be
NEC's handset warranty does
disposed of properly and may
not cover damage caused from
need to be recycled. Refer to
using non-NEC batteries and /
your battery's label for battery
or battery chargers.
type. Contact your local
New batteries or batteries that
recycling centre for proper
have been stored for long
disposal methods. Never
periods of time may require
dispose of batteries in a fire
a longer charge time.
because they may explode.
Maintain the battery at or
near room temperature
when charging.
e616V
1.5 Get ready to go
Extending battery life
Turn off your handset
G
screen's backlight
The backlight uses power.
To turn it off, see page 3.6.
Avoid the Vibrate
G
ring setting
Your handset's Vibrate
setting uses more power
than a standard ring sound
or the Silent setting.
To change alert profiles,
see page 3.7.

Installing a memory card

Your handset can support a Memory Stick Duo™ (memory card) with up to 128MB.
You can use this memory How to install
card to store photos, videos the memory card
or audio, calendars, To Do
Always switch off the handset
entries and contact entries
before inserting or removing
(as vCard files).
the memory card.
Please read important
Push the memory card fully
instructions on the memory
into the Memory Stick Duo™ slot
card in Section 10 – NEC's
on the side of your handset,
health and general safety
as shown below.
information.
How to remove
the memory card
1 Push the memory card into
the slot. This will release the
card from the slot.
2 Carefully pull the memory
card out of the slot.
How to format
the memory card
Before you can use the
memory card, you need
to format it:
1 Press
2 Scroll to
3 Scroll to Memory Card Tool
4 At Format mem. card
press
5 Press Yes
Formatting the memory card
will erase all previously
stored data.
e616V
Get ready to go 1.6