Installing The Hardware - D-Link dap-3520 Quick Installation Manual

Installing the Hardware

Power over Ethernet (PoE) Setup
Connect one end of an Ethernet cable (included with your package) to
Step 1
the LAN port on the DAP-3520 and the other end of the Ethernet cable
to the port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the DATA IN port on the PoE
Step 2
base unit to your router/switch or to a PC.
Attach the power adapter to the connector labeled POWER IN on the
Step 3
PoE base unit. Attach the power cord to the power adapter and into an
electrical outlet.
8