Advertisement
Temperature Controller
specifications/Installation
Troubleshooting
P1 Error - Indicates sensor needs replaced or that water has come in contact with controller. Unplug
unit and allow it to try completely before re-starting up. If P1 error continues, contact your dealer for
a replacement temperature sensor.
Temperature Error - if the digital display reads an unusual temperature reading (like 122 F), it indicated
a temperature sensor malfunction. Contact your dealer or Current-USA for a replacement temperature
sensor.
Short cycling
Please allow your chiller to operate for a minimum of 48 hours for it to reach the desired setpoint. If
the chiller turns on/off in a repeated cycle, this indicates that:
1. The chiller is over heating.
Ensure that enough air flow is flowing through the chiller. The chiller may need to be moved away from
a wall or from underneath the stand to allow proper air flow.
2. The fuse needs to be replaced.
The fuse for this chiller is located in the back of the chiller next to the power cord. Replacement fuses
can be purchased locally at a hardware or automotive store.
To remove the fuse, simply unscrew the cap in a counter clockwise and remove fuse from cap. Replace
with a new fuse and screw cap back on. Fuse is 250V/15A.
WWW.CURRENT-USA.COM
Advertisement
