• Do not use the Prime Tower Chiller for anything other then its intended use. The use of attachments not recommended or sold by Current USA may cause unsafe conditions. • Exposing chiller/power cords to water may cause electrical short and fire.
7. Before turning on chiller, ensure the following: a) The chiller must have adequate water flow for proper operation. Model Min/Max Flow 2645 5-10 gpm 2646 6-12 gpm b) Make sure the pump will operate normally without any blockage.
Page 4
- Vacuum any dirt or debris from front cover. Remove air filter and vacuum rinse with cold water. Air dry and replace. - Clean any salt creep that may build up on unit with freshwater. Please visit www.current-usa.com/repository/newsletter/issue2.html for more tips on chiller maintenance. WWW.CURRENT-USA.COM...
The temperature must be set between 60-85 degrees F. 3. Confirm set temperature by pressing SET button again or waiting for 8 seconds. The current aquarium temperature will then be displayed when chiller begins to operate in normal mode.
If P1 error continues, contact your dealer for a replacement temperature sensor. Temperature Error - if the digital display reads an unusual temperature reading (like 122 F), it indicated a temperature sensor malfunction. Contact your dealer or Current-USA for a replacement temperature sensor. Short cycling Please allow your chiller to operate for a minimum of 48 hours for it to reach the desired setpoint.
If you discover a defect, Current USA, Inc. will, at it’s option, repair or replace the product at no charge to you, provided you return it during the warranty period. It is required that you present this warranty card and a copy of the bill of sale as proof of original purchase date, in the event the product needs repairs, within the warranty period.