• Do not use the Prime Tower Chiller for anything other then its intended use. The use of attachments not recommended or sold by Current USA may cause unsafe conditions. • Exposing chiller/power cords to water may cause electrical short and fire.
Make sure the chiller is plugged into a GFCI protected 110V power outlet. 7. Turn on water pump and check for leaks. IMPORTANT: Do Not Run Chiller without water flow. Doing so may damage evaporator. 8. Set the temperature controller to the desired temperature as instructed in Programming WWW.CURRENT-USA.COM...
Page 4
Warning: always disconnect chiller before cleaning or performing any maintenance Monthly: Vacuum any dirt or debris from front cover. Remove air filter and vacuum rinse with cold water. Air dry and replace. Clean any salt creep that may build up on unit with freshwater. WWW.CURRENT-USA.COM...
1. Press the SET button. The indicator light will appear and the display will automatically show the previous set temperature. 2. Press the SET button again, the indicator light will turn off and the current water temperature will be displayed.
Page 6
If you discover a defect, Current USA, Inc. will, at it’s option, repair or replace the product at no charge to you, provided you return it during the warranty period. It is required that you present this warranty card and a copy of the bill of sale as proof of original purchase date, in the event the product needs repairs, within the warranty period.
Need help?
Do you have a question about the Prime Tower 2645 and is the answer not in the manual?
Questions and answers