j5 create JUA375 User Manual page 9

USB 3.0 MULTI-ADAPTER
1. The installation page will be launched. To
start click on Install the Latest Driver. Please
make sure you are connected to the internet
or press Install Driver to start the installation.
3. Read the license agreement, check I
accept the terms of the license agreement,
click Next >
5. After restarting your computer connect the
USB 3.0 MULTI-ADAPTER USB cable to your
PC or Notebook. The Installing device
driver software message will pop-up.
6. Windows 8.1/8/7:
When the driver software has been
installed successfully the message to the
right will appear on your computer.
Windows XP: An icon (
on the lower right toolbar. Your driver
software was installed successfully when
the message to the right is shown.
The display functions of the USB3.0 Multi-Adapter will be activated after the computer has
been restarted. You might see the mirror display shown on the display device.
2. After pressing the installation option, the
4. When the Install Shield Wizard is complete,
) will be seen
8
InstallShield Wizard will launch, click Next
to continue.
select Yes, I want to restart my computer
now. Click Finish to restart.
USER MANUAL