Getting Started; Installation For Windows; Device Driver Installation - j5 create JUA375 User Manual

USB 3.0 MULTI-ADAPTER

GETTING STARTED

Notes Before Installation
Install the driver completely before inserting the USB cable into your computer

Run the setup program as an administrator to avoid errors in installation

Connect the HDMI /VGA Cable for the display to the HDMI/VGA port on the

JUA375/370 first before connecting the USB cable to the computer
Un-install the previous driver first before installing the latest driver

1. Start the device driver installation (please refer to your PC system OS installation in the
next section) *Note: install driver completely before following steps 2 through 5.
2. Connect the USB 3.0 cable connector to the host laptop
3. Connect the HDMI/VGA cable for the display device
4. Connect the Ethernet cable
5. Your USB HUB port is now ready to use

INSTALLATION FOR WINDOWS

Device Driver Installation

This section illustrates the simple device driver installation guide for Windows 7 operating
system. When your computer is ready to use, insert the Driver CD into the CD-ROM drive. The
setup program should be launched automatically; if it doesn't, go to Computer, click on
your CD drive, and manually run the setup CD. Double Click on Setup.exe to start.
※ Make sure the USB cable is unplugged from your PC or Notebook before executing the
installation program.
7
USER MANUAL