Powder Coffee Preparation - Panasonic NC-ZA1 Operating Instructions Manual

Powder coffee preparation

Preparations: Fill the water tank with water.
1
(P. GB16)
Operate rinsing cycle.
2
1
Select "powder coffee preparation" on the main menu.
2
Select drink menu.
• If you select speciality coffee or milk menu, attach the milk hose to the espresso machine. (P. GB21)
Espresso
Coffee
Cappuccino
3
Fill the powder coffee shaft with one level measuring spoon of fresh coffee
powder and close the lids. Place a cup(s) under the spout. Then press
.
• Make sure the powder coffee shaft is dry before filling with coffee powder. Continuous usage may cause condensation in
the powder coffee shaft.
• Make sure the door is closed firmly.
GB24
• If
Latte Macchiato
• In order to reduce heat and splashing, adjust the dispenser height to
suit your cup size by moving it up and down. If the dispenser is difficult
to move, clean it. (P. GB36)
• Ensure that you only use the measuring spoon provided.
• Do not fill more than one level measuring spoon (max. 10 g) of coffee
powder.
• Do not fill the powder coffee shaft with water-soluble, freeze-dried,
instant products or other drink powders.
• Too finely ground coffee powder may clog the brewing unit.
• Preheat a cup(s) or pot by pouring hot water or use hot water menu
(P. GB26) to have hot and tasty coffee.
After preheating a cup(s) or pot, throw the hot water away.
• If
Note
is pressed, the display will return to the main menu.
Note
is pressed, the display will return to the previous display.