Cappuccino/Latte Macchiato/Hot Milk - Panasonic NC-ZA1 Operating Instructions Manual

Cappuccino/Latte Macchiato/Hot
milk
Preparations: Fill the water tank with water.
1
(P. GB16)
Operate rinsing cycle.
2
1
Attach the milk hose.
Insert the straight cut end of the milk hose through
1
the side opening of the espresso machine.
Insert the end of the milk hose into the opening on
2
the side of the milk foamer until it stops.
Press the milk hose into the guide, then close the
3
door.
Insert the milk hose into the milk package.
4
Do not use soy or rice milk otherwise it may
influence the milk foam quality.
2
Fill the coffee bean container with whole coffee beans (except hot milk
preparation). Then place a cup(s) under the spout.
• When using a tall cup, use the Latte Macchiato
plate instead of the drip tray.
• Preparing hot milk, move on to step 3.
3
Select "Cappuccino", "Latte Macchiato" or "Hot milk" on the main menu.
Hot milk Cappuccino
Latte Macchiato

Note
• In order to reduce heat and splashing, adjust the dispenser height to
suit your cup size by moving it up and down.
If the dispenser is difficult to move, clean it. (P. GB36)
• When preparing 2 cups of drink, place the
cups under the spout side by side.
• Preheat a cup(s) or pot by pouring hot water or use the hot water
menu (P. GB26) to have hot and tasty coffee.
After preheating a cup(s) or pot, throw the hot water away.
• Result of the Latte Macchiato may vary by the shape of glass.


GB21