Change The Sound Driver Output Destination - NEC Quadro K5200 User Manual

3.2 Change the sound driver output destination

If connecting DP port of display with DP port of Quadro K4200 directly, the sound is output from
the display that is connected. At this time, since no sound is heard from the workstation speaker,
when you issue the sound from the workstation speaker, change setting in the following procedure.
If you want to output the sound from the display is set to display the output destination.
(1) Right-click the Sound icon at the bottom of screen (indicated by red circle).
(2) Click [Playback devices(P)].
(3) The window as shown below appears.
Check the current settings, select the device you want to output to the change of the output
destination.
Example)
If the default device is [NVIDIA High Definition Audio], select [Realtek High Definition
Audio], and click [Set Default].
・[NVIDIA High Definition Audio] is the output from the DisplayPort of the connected display.
・Speakers(*) is the output from the workstation.
(*)[Realtek High Definition Audio] is name different by the workstation.
２８