Siemens CCDA1445 Installation Manual page 27

Building Technologies
Fire Safety & Security Products
5 Safety wire screw
6 Allen key
7 Outdoor housing
R86
266
Dimension of wall mount
1. Paste the template on the wall.
2. Drill 4 holes into the wall with Ø ⅜" (9.5 mm), depth 1½" (40 mm).
3. Use a hammer to put an expansion anchor into each hole just drilled.
4. Attach the wall mount to the wall
5. Fasten the 4 hexagon head nuts securely.
6. Pull the rubber cap onto the mount pipe.
7. Attach an outdoor housing to the wall mount.
8. Use an Allen key to fasten the fixing screw to prevent the outdoor housing from
falling.
9. Fix the safety wire of the outdoor dome housing to the mount using the safety
wire screw.
10. Place the rubber cap in the proper position.
The installation is completed.
180
Installation
154
112
Ø 12
Unit: mm
048_CCDA1445_A6V10257135_V1.0_en
27
20.08.2009