Download Print this page

Advertisement

Quick Links

ADDITIONAL INFORMATION

CAUTION To Reduce the Risk of Fire or injury to Persons, Read and Follow these instructions relating to
batteries.
1. Use only the following type and size of battery: 4 'C' size (UM-2) alkaline batteries.
2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal
instructions.
3. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes and skin. It may be
toxic if swallowed.
4. Exercise care in handling batteries in order not to short the battery with conductor material such as rings, bracelets, and
keys. The battery or conductor may overheat and cause burns.
5. Do not attempt to recharge the battery provided with or identified for use with this product by heating them. The batteries
may leak corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the battery provided with or identified for use with this product by heating them. Sudden release
of the battery electrolyte may occur causing burns or irritation to eyes or skin.
7. All batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure
and rupture the discharged batteries.
8. When inserting batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries
can cause charging, which may result in leakage and explosion.
9. Remove the batteries from this product if it will not be used for a long period of time(several months or more) since during
this time the battery could leak, damaging in the product.
10. Discard "dead" batteries as soon as possible since "dead" batteries are more likely to leak in a product.
11. Do not store this product, or the batteries provided with or identified for use with this product in high-temperature areas.
Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from
condensation during the storage and defrosting. Batteries should be stabilized at room temperature prior to use after storage.
12. Do not mix old and new batteries or different types of batteries. Do not mix alkaline, standard (Carbon-Zinc) or
rechargeable (Nickel-Cadmium) batteries.
Specification
This product has been manufactured in accordance with the European RTTE directive. It complies with the
European Low Voltage Directive 72/23/EEC and the European EMC Directive 89/336/EEC.
For a copy of the Declaration of Conformity for this product, please write to Lazerbuilt at the address show in the
Guarantee section below.
Guarantee/Service
Your telephone is guaranteed for a period of 12 months from the date of purchase. Before returning for repair,
please read the section 'Troubleshooting' (in this guide). If you are still unable to resolve the problem then call the
HELPLINE on 01438 749009 (during office hours). In many cases we will be able to resolve your problem without
requiring the product to be returned.
Guarantee Procedure
In the unlikely event that your Mybelle telephone develops a fault within the first month of purchase, it should be
returned with a copy of the purchase invoice, to your retailer who will exchange it for a new one. If your telephone
becomes faulty within the guarantee period but after the first month, it should be returned for repair (with a copy of
the purchase invoice), to Lazerbuilt Ltd, 20, Gunnels Wood Park, Stevenage, Herts, SG1 2BH
After the guarantee period, return your phone to the address shown. Indicate the problems you are experiencing
and include your name, address, telephone number and a postal order/cheque for £4.00 to cover the handling
charge. Lazerbuilt will then send you an estimate for the repair.
Important Note -This guarantee does not cover:- misuse; negligence; excessive voltage; faults on telephone line
or damage due to lightning. This guarantee does not affect your statutory rights.
Made in China. Distributed in the U.K. by Lazerbuilt Ltd (www.lazerbuilt.co.uk)
11
CALLER ID TELEPHONE MODEL 205
SUBSCRIPTION TO A CALL ID SERVICE FROM YOUR TELEPHONE
COMPANY IS REQUIRED FOR CALLER ID FEATURES TO WORK
CORRECTLY
PLEASE READ AND FOLLOW THIS MANUAL BEFORE USING YOUR
TELEPHONE AND KEEP IT FOR FUTURE REFERENCE

Advertisement

loading

Summary of Contents for Hello Kitty 205

  • Page 1: Additional Information

    The battery or conductor may overheat and cause burns. 5. Do not attempt to recharge the battery provided with or identified for use with this product by heating them. The batteries CALLER ID TELEPHONE MODEL 205 may leak corrosive electrolyte or explode.
  • Page 2: Location Of Controls

    LOCATION OF CONTROLS TROUBLESHOOTING (continued) The Caller ID display does The Caller ID unit will not function until you have not show the caller's Caller ID service from your local telephone Information company. Call your local telephone company to have Caller ID installed on your phone line. Check your phone line connections.
  • Page 3: Troubleshooting

    TROUBLESHOOTING LOCATION OF CONTROLS PROBLEMS CHECK Receiver No dial tone Are all the plugs correctly connected. Hook Switch Is the phone plugged into the telephone outlet. RECEIVER VOLUME Phone does not work Are all cords connected properly? (NORMAL/HIGH) Phone does not ring Ringer Switch may be set to OFF? Slide switch to the ON position.
  • Page 4: Battery Installation

    INSTALLATION CALLER ID OPERATION (continued) BATTERY INSTALLATION ERASE A SINGLE CALL IN CALLER ID MEMORY Insert four (4) "C" size (UM-2) batteries (not included) Press [UP] or [DOWN] for the Caller ID memory location to be reviewed. To in this unit to use the Caller ID and telephone clear a single Caller ID memory location, press [ERASE ] button, the LCD shows functions as follows: 'DEL?', press [ERASE ] again to confirm.
  • Page 5: Caller Id Operation

    SETUP CALLER ID OPERATION The phone allows you to take advantage of the Caller Identification service that Note: SETUP is used to set the TIME/DATE shown on the display and to adjust the may be offered by your local telephone company. Not all local telephone display contrast.
  • Page 6: Basic Operation

    Time Break Recall (TBR). MEMORY DIALLING The period of the Recall signal can be adjusted between 100mS and 300mS, by the The 205 allows you to store up to 10 numbers in memory that may then be easily switch on the handset.. dialled.