Page 1
CD DUAL ALARM CLOCK RADIO WITH CALLER ID PHONE OWNER’S MANUAL KT2017 SUBSCRIPTION TO CALLER ID SERVICE FROM YOUR LOCAL TELEPHONE COMPANY IS REQUIRED FOR ALL CALLER ID FEATURES TO OPERATE CORRECTLY PLEASE READ AND FOLLOW THIS MANUAL BEFORE USING YOUR...
IMPORTANT SAFETY INSTRUCTIONS 14. Do not use the telephone to report a gas leak in the vicinity of a leak. 15. Never install telephone wiring during a lightning storm. This symbol is to alert you the important 16. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
(a) Do not mix old and new batteries. CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES (b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. The telephone company may make changes in its communications facilities, equipment, If the unit is not to be used for an extended period of time, remove all the batteries. Old operations or procedures, where such action is reasonably required and proper in its or leaking batteries can cause damage to the unit and will void the warranty.
TIME SETTING RANDOM PLAYBACK Enables all the tracks on a disc to be played in a Random sequence. In STOP mode press random button once. Icon, RANDOM, appears in the LCD and a Press and hold the time set button. track is selected at random and playback will begin.
Page 5
ALARM 1 SETTING SNOOZE OPERATION Press and hold the al1/al 2 on/off button until “ALARM 1” icon appears in the LCD. When the alarm sounds (BUZZER, RADIO or CD), you can press the SNOOZE BUTTON Press and hold the alarm set button. to extend the alarm time by 7 minutes.
NTRODUCTION TO CALLER ID INSTRUCTIONS LOCATION OF CONTROLS This unit allows you to take advantage of the Caller Identification service that may be offered by your local telephone company. Not all local telephone companies provide Caller Identification service. Therefore, you must make sure the service is available. IMPORTANT: For your Caller ID to function, you must first contact your local telephone company to arrange to have Caller ID with Call Waiting service installed on your line.
Page 7
SETTING TIME AND DATE SETTING THE CALLER ID Press the options button repeatedly until the TIME/DATE 12:00 1/01 setup menu appears in the Display. Setting the CALLER ID includes Contrast, Home Area Code, Local Area Code, Time/Date, SET TIME/DATE The Hour digit “12” will flash to prompt for your time and date Call Waiting, Language Selection and TONE/PULSE setting in this order.
UNKNOWN Your telephone company is unable to receive information This Hello Kitty Caller ID Telephone has 14 memory locations including Last Number Redial. about this caller’s name. Your phone can store three phone numbers for one-touch dialing, i.e., for emergency or Your telephone company is unable to receive informattion about this caller’s number.
TROUBLESHOOTING GUIDE frequently called numbers. You can additionally store up to 10 phone numbers for two-touch dialing. Each phone number must be stored in a specific memory location to enable your phone to locate a number from the memory for automatic dialing. The one-touch memories are numbered M1, M2 and M3, while the 10 two-touch memories are stored through the PROBLEMS CHECK...
CONSUMER INFORMATION Press the options button repeatedly until SET Caller ID displays in the LANGUAGE appears on the display. Press Button This equipment complies with Part 68 of the FCC rules and the requirements adopted by the wrong language to choose the desired language and press option button ACTA On the bottom of this equipment is a label that contains, among other information, a to enter.
Please refer to the instructions on the enclosed warranty card for returning your unit for This Hello Kitty Caller ID Clock Radio represents a fine example of electronic engineering service. When returning the unit, please remove batteries to prevent damage to the unit in and construction.
Need help?
Do you have a question about the KT2017 and is the answer not in the manual?
Questions and answers