Making Skype Calls - Nexotek Callisto Spark NT-B300 User Manual

Usb skype gateway
Hide thumbs Also See for Callisto Spark NT-B300:
Table of Contents

Advertisement

CHAPTER 7: USING THE GATEWAY WHEN AWAY FROM HOME

Making Skype Calls

The NT-B300 allows you to make Skype calls from any phone so you can enjoy free
Skype-to-Skype calls wherever you go. You do this by calling the phone that is routed to
the gateway, which will then divert your call into an Internet call. In order to use this
function, you must enable and configure it as described in the setup above.
The Skype contact who you want to call must have a speed dial number. Refer to
Appendix B for instructions about assigning speed dial numbers.
1. Call the phone connected to the gateway, dialing as you normally would if you
were placing a call to this number.
2. After that phone rings the number of times you specified when you configured the
diverting function, the gateway will answer the call and prompt you for your
password. Enter the password and then press #.
3. When you hear a new dial tone with a higher pitch, dial the speed dial number of
the Skype contact you want to call and press # to send the call.
For example, suppose your home phone number was (123)456-7890 and your
phone password was 0107. Suppose the area code of your mobile phone was also
123. If you wanted to call your Skype contact with the speed dial number 17 from
your mobile phone, you would dial as follows:
4567890
Home Phone Number
#
0107
Phone Password
17
Skype Speed Dial Number
32
#

Advertisement

Table of Contents
loading

Related Products for Nexotek Callisto Spark NT-B300

Table of Contents