Table of Contents
Advertisement
CHAPTER 4: CONNECTING YOUR GATEWAY
3. Now take the USB cable included in the gateway package and plug the smaller
end into the gateway's port labeled USB. Then plug the other end into an open
USB port on your computer.
4. You will see balloons appear near your system tray indicating that your computer
has detected the gateway and installed the drivers. This is normal. If you have
used a NexoTek phone before, the balloons might not appear because the
necessary drivers are already installed. The final balloon to appear should say
Your new hardware is installed and ready to be used.
5. When you are finished, you will see the SkyMagic icon become a green phone
against a light green background.
18
Advertisement
Table of Contents
