It supports all of the most popular memory card types on the market, including SD, MMC and MS. The Digital Photo Frame is light and portable; take it with you anywhere to share photos with family and friends.
● Displays photos from memory cards ● Renders in a smooth and clear resolution of 320X240 pixels ● Offers a variety of display features, including a slide show mode Packaging Check List ● Digital Photo Frame ● USB Cable ● User Manual ● Power Adaptor ●...
D. Left View ③ USB Port: Connect to a computer through the USB cable or to an ③ electronic socket through the power ④ adaptor ④ Memory Card Slot: Used for inserting an SD/MMC/MS card. Charge the battery The device features built-in rechargeable battery for portable use. It may take 3 hours to fully charge it, and each full charge can be used continuously for about 2.5 hours.
Page 6
Connecting to Computer Connect it to a computer through the provided USB cable. The battery is charged once the connection is successful. Select to download files from computer. If you want to see the charging progress, press the UP/DOWN button to select the option at the right and then press the ENTER button to confirm.
Page 7
image files between your computer and the unit. Step 1: Connect the unit to the computer through the provided USB cable. Step 2: Press the UP/DOWN button to select the “USB” option and then press the ENTER button to confirm. Step 3: A photo manager tool runs automatically (depending on your computer’s configuration.) If not, you can run it manually from the disk drive by (1) opening “My Computer”;...
Page 8
Step 3: When the Photo Manager is running, select the image files that you want from the left pane. Step 4: Click the “Move To Internal memory” button to send the selected image files to the unit. Before moving, you can: ·Rotate the image left by clicking the “Rotate Left”...
Step 4: Wait for the transfer progress to complete before disconnecting the unit from the computer. Using Your Digital Photo Frame View photos from memory card or the internal memory Step 1: Power on the unit by holding the POWER button for a while.
Page 10
button to confirm the selection and enlarge the selected photo to fill the screen. Step 5: In full-screen mode (Single Show Mode): • Press the MODE button to start the automated slide show. In slide show mode, you can press the MODE button repeatedly to set the time interval between slides. Press the ESC button to stop slide show and return to the thumbnail view.
Page 11
Step 2 Press the UP and DOWN buttons to select “Copy One” or “Copy All”, and then press the ENTER button to confirm. If you select “Copy One”, press the MODE, UP and DOWN button to select the picture that you want to copy and then press the ENTER button to confirm.
Page 12
Delete files from the device To delete files which are stored in the built-in memory, Step 1 On the main menu shown upon startup, select “Manage Files” by pressing the UP and DOWN buttons and then press the ENTER button to confirm. Step 2 Press the UP and DOWN buttons to select “Delete One”...
1. Your Digital Photo Frame is a sophisticated electronic unit. Do not drop or subject the unit to jarring or strong vibrations. 2. Avoid placing the Digital Photo Frame in areas of high humidity or where it might be exposed to liquids.
Question/Trouble-shooting Guide This chapter presents some suggestions to trouble-shoot any problems you may encounter while using the unit. Even if the following guide fails to solve your problem, please do not disassemble the unit; just refer the problem to our professional staff. Please see below for contact details. 1.
Specifications Panel Size Resolution File Format Type Max. Photo Size Power Requirement Operating Temperature Storage Temperature This manual was correct and complete at the time of printing. However, specifications and updates can occur at any time without prior notice. No part of this manual may be copied, republished, reproduced, transmitted, or distributed in any way without the prior written consent of Nextar, Inc.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 17
™ Nextar is a trademark of Nextar (Hong Kong) Limited. Nextar may find it necessary to modify, amend or otherwise change or update this manual. We reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice.
Need help?
Do you have a question about the N3-511 and is the answer not in the manual?
Questions and answers