Navman MOVE-60LM User Manual page 37

ƒ The maps that are available for purchase from Navman are blue.
Note: If your computer opens Windows Explorer when the DVD is inserted, close the Windows
Explorer window.
3. Complete the following:
If the map to be installed is...
Yellow
Red
4. If you connect to the Internet via a dial-up connection, connect to the Internet now.
5. Follow the prompts to activate your Map Product Key, including:
ƒ Enter the Map Product Key when prompted.
ƒ Your computer will connect to the Internet and activate your Map Product Key.
ƒ When activation has completed, the map will change colour to yellow; continue to
step 6.
6. Click the map you want to install to your Navman. The map will change colour to a
brighter yellow
Note: You may need to install multiple maps to cover the required geographical area.
7. Complete the following:
If you want to...
install a yellow
install a red map,
install the selected maps to your
Navman,
8. Select the destination media (Navman internal memory) for the selected maps, then
click Install Maps.
The selected maps will be installed and change colour to green.
CAUTION: Do not disconnect the USB cable until the installed map or maps have changed
colour to green.
9. To use your Navman, disconnect the USB cable. You may need to manually reset your
Navman.
36
to indicate it has been selected. To deselect a map, click the map again.
map,
Then...
go to step 6.
the map needs to be activated via the Internet before it
can be installed; continue to step 4.
Then...
go back to step 6.
the map needs to be activated via the Internet before it
can be installed; go back to step 4.
continue to step 8.