Trip Meter; Device; Demo - Navman MOVE-60LM User Manual

Trip Meter

Note: This feature is not available on all models.
The Trip Meter option displays the information of your trips.
: display the current trip
: display all trips

Device

If you want to...
delete the saved information on
your Navman,
restore factory default settings,
reset the GPS,
record a GPS log of your trip,

Demo

If you want to...
enable a shop demonstration of the
navigation feature to be played,
30
Then...
tap Delete saved information:
ƒ Tap Delete My Places and tap Yes when the warning
dialog box displays. The data saved in My Places will be
deleted.
ƒ Tap Delete recent locations and tap Yes when the
warning dialog box displays. The data of recent locations
will be deleted.
tap Restore factory defaults. When the warning dialog
box displays, tap Yes. Your Navman will restart.
The Restore factory defaults option allows you to
restore default factory settings; the recent locations, saved
My Places destinations and My Drive profile on the device
will be deleted.
tap Reset GPS. When the warning dialog box displays, tap
Yes.
Note: Occasionally, the GPS fix may need to be reset. This may
occur if the receiver has been transported a long distance since last
being used; for example, to a different country, and is still trying to
establish the previous position.
tap GPS logging to turn it on.
Then...
select a demonstration country from the list and tap Start.
Tap OK. Your Navman will restart.
When your Navman is in Shop demo mode, you will see the
navigation demonstration of the pre-defined route without
having to set a destination.
Note: You cannot operate your Navman properly in Shop demo
mode.