LG 34um67 Owner's Manual page 26

26
User Settings
Picture Adjust Sharpness
Black Level
DFC
Game Adjust Response Time
FreeSync
Black Stabilizer
Color Adjust Gamma
Color Temp
Red
Green
Blue
Six Color
Reset
Adjusts the sharpness of the screen.
Sets the offset level (for HDMI only).
y Offset: as a reference for a video signal, this is the darkest color the
monitor can display.
High The picture of the screen gets brighter.
Low The picture of the screen gets darker.
Adjusts the brightness automatically according to the screen.
Sets a response time for displayed pictures based on the speed of the
screen.
For a normal environment, it is recommended that you use Middle. For
a fast-moving picture, it is recommended that you use high.
Setting to High may cause image sticking.
High Sets the response time to High.
Middle Sets the response time to Middle.
Low
Sets the response time to Low.
Off Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical
frequency of the input signal with that of the output signal.
NOTE
To use the FreeSync feature, a graphic card that supports
y
FreeSync is necessary.
Supported Interface: DisplayPort.
y
For more information, refer to AMD website at http://www.amd.
y
com/FreeSync.
On
FreeSync function on.
Off FreeSync function off.
You can control the black contrast to have better visibility in dark
scenes.
Increasing the Black Stabilizer value brightens the low gray level
area on the screen. (You can easily distinguish objects on dark game
screens.)
Reducing the Black Stabilizer value darkens the low gray level area and
increases the dynamic contrast on the screen.
Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on
the monitor, high gamma values display whitish images and low gamma
values display blackish images.
Custom
Allows the user to adjust each element. The color mode of
the main menu can be adjusted.
Warm Sets the screen color to a reddish tone.
Medium Sets the screen color between a red and blue tone.
Cool Sets the screen color to a bluish tone.
You can customize the picture color using Red, Green, and Blue colors.
Meets the user requirements for colors through adjusting the color and
saturation of the six colors(Red_Hue, Red_Saturation, Green_Hue,
Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue, Cyan_
Saturation, Magenta_Hue, Magenta_Saturation, Yellow_Hue, Yel-
low_Saturation) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the
value, the more saturated and dark the colors become.
Returns the color settings to the default settings.