10
ASSEMBLING AND PREPARING
Using the cable holder
29UM67
1
First, as shown in the illustration,push the
cable holder on the stand body, Second ,Fix
the cable holder to stand body.
Stand Body
2
Put the cables into the cable holder.
34UM67
Tidy up cables using the cable holder on the stand base as
shown in the illustration.
NOTE
Cables can get caught in the hinge area as
y
shown in the illustration, so be careful when
organizing cables.
CAUTION
Illustrations in this document represent typi-
y
cal procedures, so they may look different
from the actual product.
Applying excessive force when tightening
y
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
Be careful not to hurt your hand on the edges
y
of the screw covers.
Do not carry the monitor upside down by just
y
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
y
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.