Sony CDX-R3350 Service Manual page 3

QQ
3 7 63 1515 0
• CD Playback:
You can play CD-DA (also containing CD TEXT*
RW (MP3 files also containing Multi Session and ATRAC CD
(ATRAC3 and ATRAC3plus format).
Type of discs
CD-DA
MP3
ATRAC CD
*1 A CD TEXT disc is a CD-DA that includes information such as
disc, artist and track name.
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
• Connect the MAIN board (CNP301) and the SERVO board (CN2)
TE
L 13942296513
with the extension cable (Part No. J-2502-076-1).
MAIN BOARD
CNP301
www
.
http://www.xiaoyu163.com
1
), CD-R/CD-
Label on the disc
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
UNLEADED SOLDER
z
Boards requiring use of unleaded solder are printed with the lead
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
Q Q
3 6 7 1 3 1 5
co
.
CDX-R3350/R3350C
9 4 2 8
0 5 8 2 9 9 4 2 8
J-2502-076-1
SERVO BOARD
CN2
m
9 9
9 9
3