Changing Communications Settings; Wireless Communication - Unitech HT680 User Manual

Open the Explorer window by double clicking
your device icon in the Mobile Devices
window.
Use this window, which is the root window to
the HT680, to copy and move files between
the HT680 and your desktop computer, as
described in the "Synchronization" section.

Changing Communications Settings

If Microsoft ActiveSync fails to detect the HT680 during installation, you must
set up communications manually instead. Make sure the following conditions
are met:
 Verify that the correct communications port is selected for your desktop
computer and that it is free.
 Microsoft ActiveSync uses the specified communication ports to connect to
the HT680. Make sure these resources are available for Microsoft
ActiveSync to connect to the HT680. Other programs cannot use them
while the HT680 and your desktop computer are connected.
 Set your baud rate on the HT680 - the desktop computer will match it.
To check the communications settings, open
the Mobile Devices folder, and click File /
Connection Settings. The connection on the
HT680 is set to USB connection by default. To
adjust the connection, select Start, Settings,
Control Panel, select the Communication icon,
select the PC Connection tab, and then select
the Change Connection button.
For more information see Microsoft ActiveSync
Help.

Wireless Communication

Your HT680 is equipped with built-in Bluetooth for wireless communication.
28