Table of Contents
Advertisement
CPU
This allows you to select the speed of the CPU according to your requirement
of the performance.
1. Select "Most Efficient": This will speed up the
CPU but is consumes a lot of power.
2. Select "Most Power Saving": This will save the
battery power but the efficiency is lower.
3. Select "Dynamic arrange": This will let the speed
changes according to the system status.
4. For every selection, select the "Apply" button to
save changes.
Backup
This tool allows you to save the current registry or reset to factory default.
1.
Select "Backup" tab.
2.
Select "Save" to save current registry settings.
3.
Select "Restore" to reset the registry to factory
default. The terminal will be warm started. (Note
that the "Restore" button is unavailable if the
registry setting was not saved before.)
Battery
This tool allows you to charge the battery in the Smart
Charge mode as soon as the battery life decreases to
the level to which you selected. After changing the
charge mode, you are required to warm boot the
device. Whenever you charge the battery in the Smart
Charge mode, turn ON the device. The default charge
mode is Normal Charge.
41
Advertisement
Table of Contents
