Table of Contents
Advertisement
Before beginning installation, carefully read the following:
Because you will be restarting your computer during installation, save your
work and quit all programs before you begin.
To set up your communication settings, the HT680 serial cable is required
to connect the HT680 to your host computer.
If you run the Windows NT® operating system with a service pack, you will
be informed during setup that you may need to reinstall the service pack.
Try connecting first, and if unsuccessful, reinstall the latest service pack.
Requirements
To synchronize, ActiveSync version 3.7 or higher must be installed on both
your desktop computer and the HT680 terminal. The HT680 terminal is
installed with ActiveSync before being shipped. Therefore, you must only
install ActiveSync 3.7 on your desktop computer.
To install ActiveSync on your desktop computer, please link to the Microsoft
website to get the free download driver.
Installation
Follow the installation procedure below to install Microsoft ActiveSync, connect
your HT680 to your desktop computer, and establish a partnership for
synchronization, if required.
Download the executable program "msasync.
exe"
from
the
http://www.microsoft.com/mobile/pocketpc/
downloads/activesync35.asp.
program.
Select
the
folder
ActiveSync will be installed. If you choose not
to download into the displayed default folder,
click the Change button.
Microsoft
web
Execute
into
which
Microsoft
site
at:
this
25
Advertisement
Table of Contents
