Ht680 First Steps; Install The Battery Pack - Unitech HT680 User Manual

HT680 First Steps

Before using the HT680 for the first time, please ensure the battery is fully
charged. There are three ways to charge your HT680:
 Docking station
 USB/charging cable
 Rechargeable Lithium-Ion battery pack
NOTE: Data loss may occur if the HT680's backup battery is not adequately
charged. Before charging the main battery, make sure the backup
battery switch is ON.

Install the Battery Pack

1. Remove the battery cover.
2. Move the backup battery switch to the ON position (see the description
below).
3. Insert the battery pack so that the contacts on the battery pack line up
with the contacts in the battery compartment. Fully secure the battery.
8