Display | 3D - Optoma DS325 User Manual

User Controls

DISPLAY | 3D

"IR" options may

vary according to
model.
"3D Sync Invert" is

only available when
3D is enabled and
this mode 3D is for
DLP link glass only.
Compatible 3D

source, 3D content
and active shutter
glasses are required
for 3D viewing.
See page 50 for

supported 3D
formats.
30
English
3D Mode
Off: Select "Off" to turn 3D settings off for 3D images.

DLP Link: Select "DLP Link" to use optimized settings for DLP

Link 3D images.
IR: Select "IR" to use optimized settings for IR-based 3D

images.
3D Format
Auto : When a 3D identification signal is detected, the 3D

format is selected automatically.
SBS: Use this mode for "Side-by-side" format 3D content.

Top and Bottom: Use this mode for "Top and Bottom" format 3D

content.
Frame Sequential: Use this mode for "Frame Sequential"

format 3D content.
3D Sync. Invert
Press the "On" to invert left and right frame contents.

Press the "Off" for default frame contents.
