Basics - JVC KD-AV300 Instruction Manual

Basics

Faceplate
Volume knob (turn/press)
Initial setting — Clock adjustment
1
Press L /SOURCE to turn on the power.
2
Press MENU to display the top menu screen.
3
Turn the volume knob to select [Setting], then press the knob to
display the setting menu.
4
Turn the volume knob to select [
the [Setting / General] menu.
5
Turn the volume knob to select [Time], then press the knob.
6
Turn the volume knob to select the time format ([12 Hour] or
[24 Hour]), then press the knob.
7
Turn the volume knob to select [Adjust], then press the knob.
8
Turn the volume knob to adjust the hour, then press the knob.
9
Turn the volume knob to adjust the minute, then press the knob.
10
When [12 Hour] is selected in Step
AM or PM, then press the knob.
11
Press G to exit.
• If no operation is done for about 10 seconds, the operation will be
canceled.
• To return to the previous layer, press T.
Monitor Faceplate-open button
Remote sensor
], then press the knob to display
6
: turn the volume knob to select
Attach
Detach
To Do this
Press L /SOURCE.
Turn on the power
(The buttons on the faceplate light up.)
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
Press the volume knob to mute the sound.
• Press again to cancel.
Select a source • Press L /SOURCE repeatedly.
• Press MENU to display the top menu screen, and turn
the volume knob to select the source, then press the
knob.
Display the clock Press and hold CLOCK.
Top menu screen operation
You can select the source or enter the
setting menu on the top menu screen.
Press MENU to display the top menu
screen, turn the volume knob to select the
item, then press the knob to confirm the
selection.
• If no operation is done for about 10
seconds, the operation will be canceled.
• To exit, press G.
4
How to reset
Your preset adjustments
will also be erased.
[iPod] or [USB]: [iPod] appears
when the iPod/iPhone is connected.
Top menu screen