Sound/Display/Other Settings - JVC KD-AV300 Instruction Manual

Sound/Display/Other Settings

Select a preset equalizer (EQ)
Press EQ repeatedly to select a preset sound mode — [Flat] (default)/[Pop]/[User]/
[Techno]/[Rock]/[Classic]/[Jazz]/[Optimal]. (Corresponding sound mode indicator
lights up.)
Store your own sound settings
1
Press EQ repeatedly to select [User].
2
Press MENU to display the top menu screen.
3
Turn the volume knob to select [Setting], then press the knob to display the
setting menu.
4
Check that [ ] ([Setting / Audio]) is selected, then press the knob.
5
Turn the volume knob to select the item to set ([Bass]/[Treble]), then press the
knob.
6 Turn the volume knob to adjust the value, then press T.
7 5 6
Repeat steps and to adjust the value for other settings.
8 Press G to exit.
The setting is stored to [User] in EQ.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press T.
Activate HBS (Hyper Bass Sound)
Press HBS. (HBS indicator lights up.)
• To cancel, press the button again.
Change the display brightness (Dimmer)
Press and hold DIMMER repeatedly to select [Dimmer Low] or [Dimmer High].
Change the general settings/check information on the [Setting] menu
1
Press MENU to display the top menu screen.
2
Turn the volume knob to select [Setting], then press the knob to display the
Setting menu
setting menu.
3
Turn the volume knob to select the category ( : [Setting / Audio]/
: [Setting / General]), then press the knob.
4
Turn the volume knob to select the item to set (see the table below), then
press the knob.
5
Turn the volume knob to change the setting, then press the knob.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press T.
• To exit, press G.
Setting / Audio ( )
Bass
Treble
Fader
Balance
Setting / General (
Beep
Time
Language
11
−06 — +06 (00): Adjusts the sound elements of the bass tone.
−06 — +06 (00): Adjusts the sound elements of the treble tone.
R12 — F12 (00): Adjusts the front and rear speaker output balance.
L12 — R12 (00): Adjusts the left and right speaker output balance.
)
ON / OFF: Activates or deactivates the keypress tone.
12 Hour / 24 Hour: Selects time format.
Adjust: .Adjusts the clock.
English / Spanish: Selects the text language used for on-screen information.
Default: XX
ENGLISH