Selecting the Image Display Mode
You can change the size and method in which images are displayed.
Selecting the Display Size
You can select the image size from [Fit to window] (Fitting to the image display area), [50%
view], [100% view] (actual pixel size), and [200% view].
Select [View] menu
[200% view].
When you display an image in a
larger size, you can change the
display position by dragging the
image.
In the [Fit to window] display, if you double-click a section you want to enlarge, the display
changes to the [100% view] display. If you double-click on the image in the [50% view],
[100% view] or [200% view] display, the display changes to the [Fit to window] display.
Displaying the Gridlines
You can display a gridline that allows you to check the horizontal or vertical level of the image.
Select [View] menu
Performing the same operation
again hides the gridline.
You can specify the grid spacing
(1-43).
[Fit to window], [50% view], [100% view], or
[Grid lines].
2
2-5