Editing Images
Click White Balance Function
Makes white the standard for the part you selected and automatically adjusts the white
balance.
1
Click the [Click] button.
When you move the cursor over
the image, the cursor [ ] changes
to [
].
2
Click the part where is to be the standard.
The white balance is adjusted so
that the point clicked appears
white.
If you click on another point over
the image, the white balance is
adjusted again.
When you finish this operation,
click the [Click] button.
The coordinates of the cursor position and the RGB values (8-bit conversion) of an
image are displayed in the lower left of the main window (1-2).
The image is adjusted based on the value of 1
You can also adjust the white balance by clicking an achromatic color (neutral gray) part
of the image.
1-16
1 pixels from the clicked point.