Table of Contents
Advertisement
6 BASIC OPERATION
6.1 SET INTERNAL FREQUENCY GENERATOR
Set the SR810 to lock using the internal frequency generator by pressing the SOURCE button on
the front panel of the instrument until the INTERNAL LED is active.
Figure 14: Source Button, SINE out and Frequency Selector Knob
6.2 SET SIGNAL INPUT MODE
Set the SR810 for current mode operation by pressing the INPUT button on the front panel of the
instrument until the I(10
Select A or A-B when using amplified detectors with a voltage signal.
Family of Brands – ILX Lightwave
6
8
) or I(10
) LED indicator is active. This is used with unamplified detectors.
Figure 15: Signal Input Connections
• New Focus™ • Ophir
®
MLIDA, Rev A
• Corion • Richardson Gratings™ • Spectra-Physics
®
®
Advertisement
Table of Contents
