Basic System Setup; What's Included; Required Items; Unpacking - Oriel LIDA-SRS-KIT User Manual

4 BASIC SYSTEM SETUP

4.1 WHAT'S INCLUDED

The LIDA-SRS-KIT includes the following items:

Lock-In Digital Amplifier model SR810

Oriel model 75160NF Optical Chopper System

Cable, BNC male to male (2 meters long)

Oriel TracQ Basic software

Cable, BNC male to male (2 meters long)

Cable, GPIB to USB

U.S. and European power cords

An electronic copy of this user's manual on a thumb drive
Please refer to the Optical Chopper System user's manual for the items provided with the 75160NF.

4.2 REQUIRED ITEMS

The following items are required to be provided by the user for setting up the LIDA:

Computer for TracQ Basic software installation

Optical detector

Detector signal cable with BNC male connector
Refer to the TracQ Basic user's manual for minimum system requirements for the computer. If an Oriel
LIDA-compatible detector is utilized, it includes a signal cable and amplifier power cable.

4.3 UNPACKING

Remove all items from the shipping containers and verify each item is accounted for. The system
is carefully packaged to minimize the possibility of damage during shipment. Inspect the shipping
boxes for external signs of damage or mishandling. Inspect the contents for damage.
If any item is missing or damaged, immediately contact Oriel Instruments or the Newport
representative from whom the system was purchased.
Family of Brands – ILX Lightwave
WARNING
Do not attempt to operate this equipment if there is evidence of
shipping damage or there is suspicion that the equipment will not
operate correctly. Damaged equipment may present hazards.
• New Focus™ • Ophir
®
MLIDA, Rev A
• Corion • Richardson Gratings™ • Spectra-Physics
® ®