Electrical Connections; Figure 9: Main Power Connector And On/Off Switch Locations - Oriel LIDA-SRS-KIT User Manual

4.8 ELECTRICAL CONNECTIONS

Before powering up the system for the first time, it is suggested to have a qualified electrician
verify the wall socket to be used with the LIDA-SRS-KIT meets the requirements for operation as
noted.
Before making any electrical connections, verify the power switches are in the off position for the
lock-in digital amplifier and chopper controller.
Refer to the specifications section of this users' manual for the power requirements for the lock-in
digital amplifier. Refer to the specifications section of the 75160NF user's manual for the power
requirements for the chopper controller.
The LIDA-SRS-KIT conforms to CE standards for both safety and EMC. During normal use, this
equipment will not pose any electrical hazards to the user. Read all warnings before installing or
operating this system. If there are any questions or concerns, contact Oriel Instruments or the
regional sales representative for Newport.

Figure 9: Main Power Connector and On/Off Switch Locations

Family of Brands – ILX Lightwave
WARNING
To avoid electric shock, connect the instrument to properly earth-
grounded, 3-prong receptacles only.
precaution can result in severe injury or death.
ELECTRICAL SHOCK
Never attempt to open the lock-in digital amplifier. This items does not
contain any user serviceable parts. Failure to follow this warning can
result in severe injury or death.
• New Focus™ • Ophir
®
MLIDA, Rev A
Failure to observe this
• Corion • Richardson Gratings™ • Spectra-Physics
® ®