Samsung SGH-D500 User Manual page 145

Browser
For each server, the following options are available:
Profile name: enter a name that you wish to assign to
the server profile.
Home URL: set the address of your startup homepage.
When the default homepage displays, you can delete it
using the C key and enter your own choice.
Bearer: select a bearer to be used for each type of
network address accessed: GPRS only, GSM only, or
GPRS first.
Proxy: select whether or not you use a proxy server
when you connect to the WAP browser. Depending on the
setting, options in the GPRS settings and GSM settings
vary.
When the proxy is set to Enable:
GPRS settings: the following options are available:
IP address: enter the WAP gateway address required to
connect to the GPRS network.
Port: enter the port number required to connect to the
GPRS network.
APN: enter the access point name used for the address
of the GPRS network gateway.
Login ID: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
GSM settings: the following options are available:
IP address: enter the WAP gateway address required to
connect to the GSM network.
Port: enter the port number required to connect to the
GSM network.
Dial number: enter the PPP server phone number.
Login ID: enter user ID required to connect to the GSM
network.
Password: enter the password required to connect to the
GSM network.
144