Table of Contents
Advertisement
Available languages
Available languages
3. Unit description
1. Display
2. START/STOP button
3. Memory button M
4. Wrist cuff
5. Battery cover
Icons in the display:
1. WHO classification
2. Systolic pressure
3. Cardiac arrhythmia icon
4. Memory display
5. Diastolic pressure
6. Time and date
7. 'Change battery' icon
8. Release air (arrow)
9. Measured pulse
1
5
2
3
4
1
2
3
4
8
5
7
6
9
4. Prepare measurement
Inserting battery
• Remove the battery cover (left side of the unit).
• Insert two 1.5 V micro batteries (alkaline, type LR 03). Make abso-
lutely sure that you insert the batteries with the correct polarity as
marked.
Do not use rechargeable batteries.
• Replace the battery cover carefully.
• With batteries inserted, the unit permanently displays either the
time or the date.
If the 'change battery' icon
longer possible and you must replace all the batteries.
Used batteries do not belong in the household waste. You are legally
obliged to dispose of the batteries. Dispose of them via your special-
ist electrical supplier or local collecting point for recyclable waste.
Note: You will find these markings on batteries con-
taining harmful sub stances: Pb = battery containing
lead, Cd = battery containing cadmium, Hg = battery
containing mercury.
Setting date and time
It is vital to set date and time. Only in this way is it possible to save
and subsequently retrieve your measured values with the right date
and time.
Time is shown in 24 hour format.
12
is displayed, measurement is no
Advertisement
Table of Contents
