Advertisement
22 23
HYDRAULICS AND FRONT LOADERS
HYDRAULIC POWER TO MEET YOUR DEMANDS
CLOSED CENTRE LOAD SENSING HYDRAULICS
Hydraulic efficiency makes an important contribution to the overall performance of the tractor. T7.170
to T7.210 models are fitted with a 113 or 125 litres per minute hydraulic pump, this increases to 120
or 150 litres per minute on the T7.220 and above. T7 Auto Command models benefit from a priority valve
which guarantees optimum steering response in demanding hydraulic applications. For T7 Range Command
and Power Command models, a separate 65 litres per minute pump takes care of the steering. Full hydraulic
power is always available at the remote valves and lift linkage, but only as much as is needed. The variable
displacement pump only works on demand, which reduces fuel consumption.
ELECTRONIC OR MECHANICAL - YOU DECIDE
The Classic armrest incorporates mechanical controls for the remote valves.
SiderWinder™ II armrest models have electronic controls, with two controls on
the CommandGrip™ handle for ease of use. A hydraulic control joystick can be
specified. This can be set to operate front or rear valves.
Advertisement
