Technical Specifications - RoDEK R2100A Installation Manual

R4100A_Manual 2002- 25.02.2002

5. TECHNICAL SPECIFICATIONS

Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<0.1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Damping Factor @ 4 Ohms Load All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
Operation Mode set to FULL,
All Channels driven simultaneously
Channel Separation
All Channels
Input Sensitivity
All channel Pairs
Integrated Cross-Over/Filtering
Slope Rates
Highpass Cross-Over Frequency Range
Lowpass Cross-Over Frequency Range
Fuses
Dimensions (W x H x D)
16:36 Uhr Seite 29
R4100A
4x85W
4x95W
4x140W
2x280W Bridged
> 200
> 95dB
10Hz - 40kHz
> 55dB
0.2V - 9V
3 x 25 A
384 x 65 x 265 mm
R2180A R2100A
2x185W 2x105W
2x190W 2x110W
2x310W 2x150W
1x610W Bridged 1x300W Bridged
> 200 > 200
> 95dB > 95dB
10Hz - 40kHz 10Hz - 40kHz
> 55dB > 55dB
0.2V - 9V 0.2V - 9V
12 dB/Octave High- & Lowpass
continuously variable 10 - 400 Hz
continuously variable 30 - 400 Hz
3x25A 2x20A
405 x 65 x 265 mm 292 x 65 x 265 mm
29