Technische Spezifikationen; Technical Specifications - RoDEK RI-450-200 Installation Manual

6. TECHNICAL SPECIfICATIoNS

Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 2 Ohms (THD<1%)
Rated Power Output (RMS)
All channels driven simultaneously
@ 13.8 V into 4 Ohms (THD<1%)
Damping Factor @ 4 Ohms Load
All Channels
Signal-to-Noise Ratio (A-Filter Weighted)
All Channels @ full rated power output
Frequency Response (-3dB)
Operation Mode set to FULL,
All Channels driven simultaneously
Channel Separation
All Channels
Input Sensitivity
All channel Pairs
Integrated Cross-Over/Filtering
Slope Rates
Highpass Cross-Over Frequency Range
Lowpass Cross-Over Frequency Range
Fuses
Dimensions (W x H x D)
RI-Amp 5-CH Manual_D+E.indd 25
RI-450-200
4 x 50 W + 1 x 220 W
4 x 70 W + 1 x 350 W
2 x 140 W + 1 x 220 W Bridged into 4 Ohms
> 75
> 85dB
10Hz - 40kHz
> 55 dB
0.2V - 8V
12 dB/Octave High-&Lowpass
continuously variable 10 - 400 Hz
continuously variable 40 - 400 Hz
4 x 30 A
581 x 81 x 298 mm
25
05.01.2008 12:45:33 Uhr