Sony RDR-HXD760 Operating Instructions Manual page 87

Table of Contents

Advertisement

16 : 9
4:3 Letter Box
4:3 Pan Scan
b
Note
Depending on the disc, "4:3 Letter Box" may be
selected automatically instead of "4:3 Pan Scan" or
vice versa.
Progressive Output
If your TV accepts progressive (525p/625p)
format signals, set "Progressive Output" to
"On." You will enjoy accurate colour
reproduction and high quality images.
1
Select "Progressive Output," and press
ENTER.
2
Select "On," and press ENTER.
The display asks for confirmation.
3
Select "Start," and press ENTER.
The video switches to a progressive
signal for 5 seconds.
4
If video signal appears OK, select "Yes,"
and press ENTER.
If picture is distorted, select "No," and
press ENTER.
Progressive Mode
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV and displays images at 25 frames/50
fields (30 frames/60 fields) per second. Film
based software is derived from film and
displays images at 24 frames per second.
Some DVD software contains both Video
and Film.
In order for these images to appear natural on
your screen when output in progressive mode
(50 or 60 frames per second), the progressive
video signal needs to be converted to match
the type of DVD software that you are
watching.
You can fine-tune the progressive 525p/625p
video signal that is output when you set
"Progressive Output" to "On."
Note that you must connect to a progressive
format TV using the COMPONENT VIDEO
OUT jacks (page 13).
Auto
Automatically detects the
software type (Film-based or
Video-based) and selects the
appropriate conversion mode.
Normally select this position.
Video
Fixes the conversion mode to
the mode for Video-based
software.
b
Note
When picture noise appears after you set the
recorder to progressive format, hold down x, and
press PROGRAM – (minus) on the unit.
Line1 Input
Sets the method of inputting video signals
from the LINE 1 IN jacks on the rear panel of
the recorder. Select an option for each of the
items below according to the combination of
jacks and methods that you are going to use.
Video
Inputs video signals.
S Video
Inputs S video signals.
87
,continued

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents