Troubleshooting
General
Problem
Cause & Correction
The power cord is not plugged in. Plug in the power cord.
Check whether electricity failed. Check the condition by operating other
No Power.
Check whether you select right function. Press FUNCTION and check the
No sound.
If not, connect speaker cables correctly. Speaker cables connected
An unplayable disc is inserted. Insert a playable disc.
No disc is inserted. Insert a disc.
The unit does not start
The disc is dirty. Clean the disc. (Refer to the 23 page)
playback.
The disc is inserted upside down. Place the disc with the label or printed
The antenna is positioned or connected poorly. Connect the antenna
The signal strength of the radio station is too weak. Tune to the station
Radio stations cannot
be tuned in properly.
No stations have been preset or preset stations have been cleared. (when
The remote control is too far from the unit. Operate the remote control
There is an obstacle in the path of the remote control and the unit. Remove
The remote control
does not work properly.
The batteries in the remote control are exhausted. Replace the batteries
electronic devices.
selected function.
correctly.
side facing upwards.
securely.
manually.
tuning by scanning preset channels) Preset some radio stations, see page
14 for details.
within about 23 ft. (7 m)
the obstacle.
with new ones.
Troubleshooting
19
4