User Setable Items - Pioneer CDJ-350 Service Manual

1
[Measuring method]
A
1. The adjustment value of the Cam plate should be adjusted to "0" (Refer to Fig. 1).
2. First, rotate the Jog dial 5 times or more. The value at this time should not be inluded in measurement.
The actual measurement should be done after this rotation.
3. Enters the the Jog load confirmation mode.
4. Rotate the Jog dial quickly, and the direction of the rotation should be clockwise.
5. The rotational speed, time and the judgement are displayed in the FL display (Refer to Fig. 2).
The decreasing time of the rotation speed from ×3 to ×1.5 ("the rotation decreasing time") is displayed only when the
maximum speed is ×7 or more.
Confirm that the average of 4 times of "the rotation decreasing time" is in the spec.
Spec: 80 ± 10 msec.
B
Note: This spec (80 ± 10 msec) applied to only the process to fulfill the spec of the final product (80 ± 25 msec).
5. If "the rotation decreasing time" is not in the spec, change the adjustment value of the Cam plate and do the above
inspection from No. 3 to No. 4 again.
Cam plate
C
Fig. 1 Cam plate
[Load adjustment method]
If it is outside the specified range (-1, -2, -3, +1, +2) , adjust the position of the Cam plate.
-1, -2, -3 : To decrease the load
D
+1, +2 : To increase the load

8.3 USER SETABLE ITEMS

The following data have been set in each IC.
Item for Which User's
Setting is Available
E
A. CUE LEVEL
MIDI CHANNEL
AUTO STANDBY
LIBRARY CREATOR
VERSION No.
TIME MODE
AUTO CUE
JOG MODE
F
TEMPO RANGE
MASTER TEMPO
46
1
2
To decrease
the load
Adjust to "0".
To increase the load
Setting Value (The factory default
settings are indicated in bold.)
-36 dB/-42 dB/-48 dB/
-54 dB/-60 dB/-66 dB/
-72 dB/-78 dB
1 to 16
OFF/20 min/40 min/60 min
LIBRARY/FOLDER
—
TIME/REMAIN
ON/OFF
CDJ/VINYL
± 6 % / ±10 % / ±16 % / WIDE
ON/OFF
2
3
Judgement
Fig. 2 Example of displaying FL
Part No. Part Name
DYW1792 Flash ROM
DYW1792 Flash ROM
CDJ-350
3
4
Average of rotation
decreasing time
Content to be
Ref No. Assy
Stored
IC101 MAIN UTILITY setting
Statuses of keys
IC101 MAIN
4