Transmitter Operation - Audio Technica AT-ONE Installation And Operation Manual

System Operation
Handheld Microphone/Bodypack Transmitter set up:
Open the battery cover and insert AA batteries into
the battery compartment making sure the polarity
is correct.
Unscrew the bottom of the handheld mic and open
the battery cover to insert AA batteries into the
battery compartment, making sure the polarity is
correct.
Press and hold the power button on the micro-
phone/bodypack transmitter for 4 seconds to turn
on. If the LED remains flashing after 4 seconds it is
indicating that the battery is low on power.
Use the included key to adjust the frequency of the
transmitter to be the same as the receiver.
0dB -10dB
Use the 0dB/-10dB switch to adjust the audio input
level.